Wind flashing repair
Flashing peeled back by wind is refastened or replaced so water cannot get behind it.
A roofer in Summit can repair wind damage by replacing creased and missing shingles, resealing lifted tabs and refastening ridge caps and flashing, then seal the new shingles to the roof around them. One call to (908) 679-5768 reaches a nearby roofer who handles wind repairs.
A strong gust does its harm by lifting shingles from below, peeling them up like pages in a book. Each shingle is held by nails and a sealant strip that glues it to the course underneath, and once that seal lets go, the shingle is far easier to rip away. Rakes, eaves, corners and ridge lines feel the strongest uplift, which is why damage tends to cluster there.
Do not go up to check the roof yourself. A roof in gusty or wet weather is dangerous, and any downed power line should be left alone and reported to the utility or 911. If water is getting in near lights or outlets, shut off that area at the panel if the panel is safe to reach, and catch drips in buckets.
Missing shingles are easy to spot, but they are rarely the only damage. Many wind-damaged shingles fall back into place with a faint horizontal crease near the nail line, which marks a shingle that has lost its hold. That is why a roofer checks each course by hand, not just the bare spots.
If the problem goes deeper than it first looked, a Summit roofer may also recommend storm damage roof repair or shingle roof repair.
Looking for Summit wind damage roof repair? Call (908) 679-5768 to talk to a local roofer.
Call nowGood wind repairs fix the cause of the blow-off, not only the hole it left.
Open sections are dried in with a battened tarp so the next rain stays out. It waits for calm, dry conditions, since a tarp in high wind becomes a sail.
The roofer works across each slope, gently lifting tabs to see which ones still hold and which have come unsealed. A crease means replacement, because the mat is already broken.
Blow-offs often trace back to nails set too high above the nail line, too few nails or nails driven crooked. Repairs use the full nail count the shingle calls for, often six in windy areas.
Damaged shingles are removed, new ones are woven in and nailed, and the surrounding tabs are laid back down. New shingles are hand-sealed if the temperature is too low for the strip to bond on its own.
Missing ridge caps are replaced, and any lost starter strip, drip edge or rake trim is reinstalled. Flashing peeled from walls or chimneys is refastened or replaced.
Flashing peeled back by wind is refastened or replaced so water cannot get behind it.
Every shingle that lost its hold is replaced then sealed down to the course below.
Lost sections of ridge cap are rebuilt with full nailing at each piece.
Lifted drip edge and rake trim are refastened or replaced so wind cannot catch the first course.
Loose tabs without creases are glued down with roofing cement to restore the hold the factory strip lost.
Replacement makes sense when wind has damaged far more than a few shingles. If the roofer finds unsealed and creased shingles across most slopes, or the shingles are so brittle that lifting them to weave in repairs cracks the courses above, repairs will keep failing with each storm. A replacement lets the roofer install new starter strip at the eaves and rakes, new drip edge and shingles nailed to the pattern the shingle maker calls for in windy areas.
For a Summit home, ask how the roofer weighs repair against replacement. Shingles are rated for wind, and higher-rated architectural shingles with a wider sealant strip are a common choice for a replacement. If insurance is involved, the adjuster and your policy decide what is paid, and a roofer can document the damage and meet the adjuster.
A few missing shingles can usually be fixed without a large repair, as long as the decking underneath is sound. To do it right, the old nails come out, torn felt is patched and new shingles are woven into the courses above and nailed properly. Done this way, the repair blends in and holds as well as the rest of the roof.
In Summit, the hard part of missing shingles repair is often matching the color and style of an older roof. Since shingles weather and styles change, a roofer may borrow shingles from a hidden area for the visible repair. Exposed underlayment only lasts so long, so it is worth getting missing shingles replaced promptly.
In Summit, wind repairs tend to follow the big storms of the year: bare spots at the corners and rakes, plus a few shingles in the yard. From Summit out to neighboring towns such as Chatham, Mountainside, New Providence and Short Hills, roofs on exposed lots and older shingles with brittle seals tend to lose the most, so a quick repair after a windstorm keeps a few missing shingles from turning into a leak.
Searching for wind damage roof repair near me from Summit or Chatham, Mountainside, New Providence and Short Hills? Call (908) 679-5768 to talk to a roofer who works in your part of town.
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Summit is busiest after a hard winter and before the next one.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers in Summit know the roof types and weather wear common in local homes.
Ask your questions before you agree to anything.
More questions? Call (908) 679-5768
Repairs for roofs hit by hail, high wind, falling limbs and wind-driven rain, with the damage documented before anything is torn off.
Learn moreSpot repairs for wind, hail and age damage on an asphalt shingle roof, before a small gap turns into a leak.
Learn moreTemporary tarp protection for roofs opened up by wind, hail or a falling limb, before the next rain makes the damage worse.
Learn moreRepairing rotted, split or loose fascia boards along the roof edge, so the gutters stay solid and water stays out of the eaves.
Learn moreLooking for something else?
See all roofing servicesCall (908) 679-5768 for a local roofer in Summit and nearby towns.