Rotted board repair
Damaged fascia is replaced with primed wood or PVC with sealed joints and ends.
Exterior Services
Fascia Repair Summit, NJ
A Summit roofer can repair the fascia boards that carry your gutters and cap the ends of the rafters, and check the rafter tails behind the board while it is off. Dial (908) 679-5768 to talk with a local roofer about the fascia.
Fascia rot nearly always comes from water getting behind the gutter. Clogged or poorly pitched gutters spill over the back, and a roof edge with no drip edge sends water straight down the fascia. Once the wood is soft, gutter hangers pull loose and the gutter sags or tips forward.
Rotted fascia is often the visible part of a bigger problem. Left alone, the rot moves into the rafter ends and the edge of the roof deck, which turns a trim repair into structural work. Metal-wrapped fascia is especially tricky because water can get trapped behind the wrap and rot the wood out of sight.
A few observations make the first conversation more useful. Look for sections where the gutter tips forward, where the board looks dark or swollen and where paint is flaking. It also helps to know the fascia material and whether the gutters are original to the house.
Many fascia repair calls in Summit also turn up a need for soffit repair or gutter installation.
Looking for Summit fascia repair? Call (908) 679-5768 to reach a nearby roofing contractor.
Call nowThe process
The fascia repair process
Good fascia work deals with the roof edge, the gutter and the board together.
Inspect the roof edge
Before the board comes off, the roofer looks at what has been soaking it, from the shingle edge to the downspout. An awl or screwdriver finds the edges of the soft wood.
Take down the gutter
Gutters are taken down along the damaged stretch, which also shows how well the hangers were holding. Worn spikes are replaced with hidden hangers and screws.
Check the rafter tails
Soft rafter tails are cut back and sistered with new lumber, and rotted decking at the edge is replaced. This is the step that decides whether the repair lasts.
Fit the board
A replacement board matched to the existing size goes up, sealed at the ends and joints. Wood is primed on every side, including cut ends, before it goes up.
Fix the edge flashing
The metal drip edge at the roof edge is adjusted so runoff lands in the gutter, not behind it. This is the piece that keeps the new fascia dry.
Reattach gutters
The gutter is reattached with hangers spaced closely enough to carry water and debris. The finished edge is checked with a hose or after the next rain.
What is included
What fascia repair covers
Gutter rehanging
Sagging gutters are rehung on solid fascia with new hangers with screws instead of loose spikes.
Aluminum wrap
Coil stock wrap is bent to fit over solid boards to cut down on painting.
Edge flashing
Drip edge is added where the roof edge had none to keep runoff off the fascia.
Rafter tail repair
Soft framing at the roof edge is reinforced to keep the roof edge straight.
Related service
Fascia Board Replacement Summit, NJ
Fascia board replacement means taking off whole lengths of board rather than patching short sections. Replacing the whole run gives the roofer a clear look at every rafter tail and the edge of the roof deck. Many homeowners switch to PVC or composite fascia at this point because it will not rot.
For many Summit homes it makes sense to replace fascia while the gutters are off for replacement anyway. Be wary of any plan that covers rotted boards with metal instead of replacing them. Matching the board width keeps the soffit and gutter lined up.
Related service
Fascia Board Repair Summit, NJ
When rot is confined to short stretches, the damaged part of the board can be cut out and a new piece scarfed in. Angled joints hold paint and shed water better than straight cuts, so they are the standard for patch repairs. Very small areas of surface rot can sometimes be treated with a wood consolidant and exterior filler, then primed and painted.
A fascia board repair in Summit should always include a look at why that spot got wet. Common fixes include a resealed gutter joint, a cleared outlet or a new length of drip edge. Done right, the repair is hard to spot once painted.
Local help
Fascia Repair Near Me
In Summit, fascia tends to fail first on the sides of the house where gutters clog fastest. Homes in Summit and nearby towns like Chatham, Mountainside, New Providence and Short Hills range from older houses with wood fascia that needs regular paint to newer builds where metal wrap can hide rot underneath, so a look along the roof edge each spring and fall helps catch soft spots early.
Need fascia repair around Summit? Call (908) 679-5768 for a Summit roofer who serves the towns around it too.
Roofs in this climate
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Summit, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why act early
Smaller repairs
Small roof problems caught early usually stay small repairs.
Familiar with local homes
Roofers in Summit know the roof types and weather wear common in local homes.
Know what happens next
Ask your questions before you agree to anything.
Fascia Repair questions
Why is my fascia rotting?
Most fascia rot traces back to the roof edge and the gutters. Clogs, bad seams and the lack of a drip edge are the usual culprits. Once the paint fails, the wood takes on water quickly.
Do fascia boards affect my gutters?
The fascia is what gutters are fastened to. Soft fascia lets the fasteners work loose, which is often the first sign of rot. The fix is solid wood plus new hangers, pitched toward the downspout.
Should I cover rotted fascia with metal?
Metal wrap only belongs over sound wood. Gutter screws go through the wrap into the rotting board and gradually pull loose. Fix the wood, then add wrap over it.
What is the best material for fascia?
PVC and composite fascia resist rot and hold paint well. Primed wood is easy to match on older homes but needs regular paint. No material holds up if water keeps running behind the gutter.
Can fascia be repaired instead of replaced?
Repair is fine when damage is limited to a few spots and the rafter tails are sound. Long stretches of soft wood are better handled by replacing the whole board. The roofer will probe the wood to see which option fits.
More questions? Call (908) 679-5768
Other services that may help
Soffit Repair
Soffit repair for wood, vinyl and aluminum eaves, matched to what is causing the damage in the first place.
Learn moreGutter Installation
Gutter installation that carries roof water away from the siding, fascia and foundation, so water ends up where it should.
Learn moreGutter Repair
Gutter repair for leaking seams, sagging runs, loose hangers and broken downspouts, without replacing gutters that still have life in them.
Learn moreRoof Repair
Repairs for missing shingles, lifted tabs, cracked pipe boots, loose flashing and soft decking, so a sound roof keeps working for years.
Learn more
Looking for something else?
See all roofing servicesTalk to a Summit roofer about fascia repair
Call (908) 679-5768 to talk to a roofer serving Summit, NJ.